How to Make Bent Book Covers Straight Again

Download Article

Download Article

Wet book pages accept a trend to dry into wavy, folded patterns that can make them difficult to read. If you lot accidentally got your favorite book wet or left it in a humid surface area, you don't have to exit and buy a new one! Instead, you can spend a few days making certain your book is really dry and and then flattening it out to restore its pages and brand your book readable again.

1. 1

   Put your book in the freezer if yous don't have fourth dimension to repair information technology at present. If you need to wait a few days before starting to dry out out your volume, seal it in a plastic pocketbook and place information technology in the freezer. This volition stop whatsoever mold from growing and damaging your book pages further.^[one]

   • Make sure the plastic purse is airtight so that your book doesn't pick upward any additional moisture from the freezer.

2. 2

   Blot the pages with a paper towel to brand certain they are dry. Grab some paper towels and insert them between the pages of your book every 10 to 20 pages. Printing down on the book to soak up any residual moisture that might exist left in the pages.^[2]

   • Drying the book beforehand will make sure the pages don't stick together.
   • If your book has any mold on the pages, gently brush off any topical mold spores with a clean cloth and and then set your book in the sun to dry out.

   Advert

3. 3

   Open up your book and stand it on its side. Carefully open your volume pages upwards until your book is open at a 45-degree angle. Stand it upward on a towel so that the pages stay fanned out. Use caution, equally your book might exist fragile.^[3]

   • Moisture or water damaged books are prone to falling apart, so it's important to be careful when you handle them.

4. four

   Betoken a fan at the pages to dry out information technology out overnight. Put the fan on depression so that it doesn't ruffle the pages of your book likewise much. Leave your book with a fan pointed at information technology for 8 to 12 hours to ensure that information technology dries out all the mode.^[iv]

   • You can likewise prepare up a dehumidifier to dry out the pages fifty-fifty more than, if you lot accept one.

5. 5

   Sandwich your book in between two boards. You lot can use any scrap wood yous have on mitt as long every bit it covers the volume completely. Lay the book on its side with one board underneath it and one on top.^[five]

   • Plywood is a bully wood to use for sandwiching your book, since it's pretty thin.

6. 6

   Place heavy items, similar bricks, on top of the pinnacle board. Make sure they are centered on the top lath then your volume is getting fifty-fifty pressure. Yous can as well use cinder blocks if y'all don't have any bricks.^[6]

   Alternative: If you accept access to a book press, use that instead of heavy objects.

7. seven

   Point a fan or dehumidifier at your book to dry out it out. As your volume is beingness pressed, you tin dry out it out even more by circulating the air around information technology. Make sure you plow off whatever humidifiers in your habitation and shut the windows so that your book stays cool and dry out. Turn on a fan or a dehumidifier and identify it in front end of your book as it dries.^[7]

   • Endeavour to keep your book out of the direct sunlight then that it doesn't get too hot.

8. viii

   Leave your book for 1 to 2 days. Try not to disturb your book as it flattens out. Go on the heavy objects on acme of the book for as long as you can.^[eight]

   • If your book is even so wavy, you can attempt leaving it pressed for longer.

9. nine

   Go along your book pressed apartment when you store it. If you can, try to put your book in betwixt 2 book ends or a few other books then that it is being continually pressed flat. This will help flatten out the pages more and brand sure your book pages stay in their new shape.^[9]

Advertisement

1. 1

   Spray a fine mist of water over the pages of your volume. If your book has already been dry for a while, utilize a water bottle to get information technology slightly damp again. Make sure all of the pages are damp, just don't soak your book in water.^[10]

   • If you don't have a spray bottle, use a clean paint brush to dab water onto the book pages instead.

2. 2

   Set your iron to the "no steam" setting. This will ensure that your fe doesn't add any more moisture to the book. Let your fe heat upwards for nigh 5 minutes before you showtime using it.^[xi]

   • If you take an ironing board, you tin can fix that up as well. Otherwise, you can brand a modest workstation on your tabular array or counter top.

3. 3

   Place a tissue over 1 page of the book. The tissue will assistance to protect the book page from any heat harm. If yous don't take any tissues, yous tin can also utilize a canvas of apparently white newspaper.^[12]

   Alert: Never put your iron straight onto the pages of your volume, or it could burn.

4. 4

   Swipe your iron chop-chop over the tissue. Gently press your atomic number 26 onto the tissue over your book and move it in a round movement. Go out your iron on the tissue for about 3 seconds, and then rapidly pick it back up.^[13]

   • Don't leave your iron on top of the volume pages for besides long, or you could burn your book.

5. 5

   Atomic number 26 each page individually to flatten it out. Although information technology may accept a while, this is the best fashion to flatten out each and every page of your book. Try to practice each page at a time, because the atomic number 26 won't exist hot enough to flatten out ii pages at once.^[fourteen]

Advertisement

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

• The sooner you lot start drying and pressing your volume, the better it will look.

• Your book may never look how it did originally, but you can restore it partly.

Thanks for submitting a tip for review!

Advertisement

• If your damaged volume is old or expensive, take it to a professional volume repair shop.

Advertising

Things You'll Need

• Paper towels
• Towel
• Fan
• ii wooden boards
• Bricks or cinder blocks
• Dehumidifier

• Spray canteen
• Iron
• Tissues

About This Article

Thanks to all authors for creating a page that has been read 45,236 times.

Did this article aid you?

lenhardttherith.blogspot.com

Source: https://www.wikihow.com/Fix-Wavy-Book-Pages

Share this post